View A070VW05-V0_7870456.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

customer approval sheet customer approval sheet customer approval sheet customer approval sheet company name company name company name company name model model model model a aa a070vw05 v0 070vw05 v0 070vw05 v0 070vw05 v0 customer customer customer customer approved approved approved approved title : name : approval for specifications only (spec. ver. approval for specifications only (spec. ver. approval for specifications only (spec. ver. approval for specifications only (spec. ver. ) ) ) ) approval for specifications and es sample (spec. ve r. approval for specifications and es sample (spec. ve r. approval for specifications and es sample (spec. ve r. approval for specifications and es sample (spec. ve r. ) ) ) ) approval for specifications and cs sample (sp approval for specifications and cs sample (sp approval for specifications and cs sample (sp approval for specifications and cs sample (spec. ve r. ec. ver. ec. ver. ec. ver. ) ) ) ) customer remark : customer remark : customer remark : customer remark : auo pm : p/n : comment : 1 li-hsin rd. 2. science-based industrial park hsinchu 300, taiwan, r.o.c. tel: +886-3-500-8899 fas: +886-3-577-2730 auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. doc. version : 0.3 total pages : 23 date : 2008/11/13 product specification 7.0" color tft-lcd module/panel model name a070vw05 v0 planned lifetime: from 2008/sep to 2010/dec phase-out control: from 2010/jul to 2010/dec eol schedule: 2010/dec < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2008 au optronics all rights reserved, do not copy. auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 1/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. record of revision version revise date page content 0.0 2008/08/07 first draft 0.1 2008/09/17 3 6 6-9 8-10 10 11-12 18 22 correct a. general information. delete recommonded connector. change panel pin definition of gnd. modify max capability and driving condition of vled and ledpwm. correct symbol of t est and t ehd . update input timing. update esd driving condition. add item 22 of h. precautions. 0.2 2008/9/25 4-5 10 update clear drawing. correct ledpwm frequency. 0.3 2008/11/13 3 4, 5 9 11 14 17 22 update weight and power consumption. add protect film and change label position. update current consumption. update horizontal input timing. update optical spec: contrast ratio, viewing angle, white chromaticity. correct vibration test condition. add system block example. auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 2/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. contents a. general information ................................ ................................................... ..................................................3 b. outline dimension .................................. ................................................... ..................................................4 1. tft-lcd module C front view..................... ................................................... ............................................4 2. tft-lcd module C rear view ...................... ................................................... ...........................................5 c. electrical specifications.......................... ................................................... .................................................6 1. tft lcd panel pin assignment.................... ................................................... ...........................................6 2. absolute maximum ratings ........................ ................................................... ..............................................8 3. electrical dc characteristics................... ................................................... .................................................9 4. electrical ac characteristics ................... ................................................... .................................................9 6. power on/off characteristics .................... ................................................... .............................................13 d. optical specification.............................. ................................................... .................................................14 e. reliability test items............................. ................................................... ..................................................1 7 f. packing and marking ................................ ................................................... ..............................................20 1. packing form .................................... ................................................... ................................................... ..20 2. module/panel label information.................. ................................................... ...........................................21 3. carton label information ........................ ................................................... ................................................21 g. application note................................... ................................................... ................................................... 22 1. system block example............................ ................................................... ................................................22 h. precautions........................................ ................................................... ................................................... ...23 auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 3/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. a. general information a070vw05 v0 is an a-si type thin film transistor liqui d crystal display (tft-lcd). this model is composed of a tft-lcd, driver ic, fpc (fl exible printed circuit), pcb with lcd driving circuit, and a backlight unit. this product is mai nly for car after-market, and other suitable application. no. item unit specification remark 1 screen size inch 7.0(diagonal) 2 display resolution dot 800rgb(h)480(v) 3 overall dimension mm 165(h) 104(v) 5.465(t) n ote 1 4 active area mm 152.40(h)91.44(v) 5 pixel pitch mm 0.1905(h)0.1905(v) 6 color configuration -- r. g. b. stripe note 2 7 color depth -- 16.7m colors note 3 8 ntsc ratio % 50 9 display mode -- normally white 10 panel surface treatment -- anti-glare, 3h 11 weight g 132 12 power consumption w 2.5 note 4 13 viewing direction 6 oclock (gray inversion) note 1: not include fpc and protect film. refer nex t page to get further information. note 2: below figure shows dot stripe arrangement. note 3: the full color display depends on 24-bit da ta signal (pin 5~28). note 4: please refer to typical condtion driving in electrical characteristics chapter. . . ( 1 2 3 .2398 2399 2400) (1 ..480) auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 4/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. b. outline dimension 1. tft-lcd module C front view auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 5/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. 2. tft-lcd module C rear view auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 6/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. c. electrical specifications 1. tft lcd panel pin assignment pin no symbol i/o description remark 1 gnd p system ground note 1 2 gnd p system ground note 1 3 vcc p system power supply 4 vcc p system power supply 5 dr0 i graphic data r0 (lsb) 6 dr1 i graphic data r1 7 dr2 i graphic data r2 8 dr3 i graphic data r3 9 dr4 i graphic data r4 10 dr5 i graphic data r5 11 dr6 i graphic data r6 12 dr7 i graphic data r7 (msb) 13 dg0 i graphic data g0 (lsb) 14 dg1 i graphic data g1 15 dg2 i graphic data g2 16 dg3 i graphic data g3 17 dg4 i graphic data g4 18 dg5 i graphic data g5 19 dg6 i graphic data g6 20 dg7 i graphic data g7 (msb) 21 db0 i graphic data b0 (lsb) 22 db1 i graphic data b1 23 db2 i graphic data b2 24 db3 i graphic data b3 25 db4 i graphic data b4 26 db5 i graphic data b5 27 db6 i graphic data b6 28 db7 i graphic data b7 (msb) 29 gnd p system ground note 1 30 dclk i data clock input 31 nc - no connection. please leave it open 32 hsync i horizontal sync input 33 vsync i vertical sync input 34 de i data enable input (low active) auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 7/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 35 vled p led cirucit power supply 36 vled p led cirucit power supply 37 gnd p system ground note 1 38 gnd p system ground note 1 39 ledpwm i led system pwm signal 40 gndled p gnd for led circuit note 1 i: input pin; p: power pin; g: ground pin; note 1. gnd and gndled are connected together in au o module. auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 8/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. absolute maximum ratings item symbol condition min. max. unit remark vcc gnd=0 -0.5 5.0 v system power supply power voltage vled ledgnd -0.5 6.0 v led circuit power supply input signal voltage data gnd=0 -0.3 3.6 v digital signals note 1: functional operation should be restricted u nder ambient temperature (25 ). note2: maximum ratings are those values beyond which damag es to the device may occur. functional operation should be restricted to the limits in the electrical characteristics chapter. auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 9/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3. electrical dc characteristics a. typical operation condition (gnd = gndled = 0v) item symbol min. typ. max. unit remark vcc 3.0 3.3 3.6 v system power supply power voltage vled 4.5 5.0 5.5 v led cirucit power supply h level vih 0.7xvcc -- vcc v input signal voltage l level vil gnd -- 0.3xvcc v b. current consumption (ledgnd=gnd=0v) parameter symbol condition min. typ. max. unit remark input current for vcc ivcc vcc = 3.3v - 120 150 m a note 1, 2 input current for vled i vled vled = 5.0v - 420 450 ma note 1, 2 note 1:test condition is under typical eletrical dc and ac characteristics. note 2: test pattern is the following picture. 4. electrical ac characteristics a. signal ac characteristics parameter symbol min. typ. max. unit remark dclk duty cycle -- 40 50 60 % t cw / t dclk x100% vsync setup time t vst 0 -- -- ns vsync hold time t vhd 2 -- -- ns hsync setup time t hst 5 -- -- ns hsync hold time t hhd 10 -- -- ns auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 10/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. data enable setup time t est 4 ns data enable hold time t ehd 2 ns data setup time t dst 5 -- -- ns data hold time t dhd 10 -- -- ns ledpw m frequency -- 1 -- 20 khz ledpw m duty cycle -- 10 -- -- % t lcw / t ledpwm x100% t h : hsync period t dclk : dclk period t cw : the width of dclk high auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 11/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. b. input timing hs r[7:0] g[7:0] b[7:0] r0 g0 b0 r1 g1 b1 r2 g2 b2 r3 g3 b3 t h t hw t hb t hf t he r n-1 g n-1 b n-1 r n g n b n invalid invalid invalid invalid invalid invalid r n g n b n r n-1 g n-1 b n-1 t hbl t hd dclk horizontal input timing. (hv mode) dclk de t hbl t hd r[7:0] g[7:0] b[7:0] r0 g0 b0 r1 g1 b1 r2 g2 b2 r3 g3 b3 r n-1 g n-1 b n-1 r n g n b n invalid invalid invalid invalid invalid invalid r n g n b n r n-1 g n-1 b n-1 horizontal input timing. (de mode) horizontal input timing parameter symbol min. typ. max. unit remark dclk frequency fdclk 25 33 40 mhz dclk period tdclk 25 30.3 40 ns hsync period (=thd+thbl) th -- 1056 1088 dclk active area thd -- 800 -- dclk horizontal blanking thbl -- 256 288 dclk hsync front porch thf -- 40 72 dclk delay from hsync to 1 st data the -- 216 -- dclk hsync pulse w idth thw 1 128 136 dclk hsync back porch thb 80 88 215 dclk auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 12/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. vs hs line t vw xn-1 xn x1 x2 x3 xn-1 xn t v t vf t ve t vbl t h t vf invalid t vd vertical timing. (hv mode) de line xn-1 xn x1 x2 x3 xn-1 xn t vbl invalid t vd vertical timing. (de mode) vertical input timing parameter symbol min. typ. max. unit remark vsync period (=tvd+tvbl) tv -- 505 525 th active lines tvd -- 480 -- th vertical blanking (=tvf+tve) tvbl -- 25 45 th vsync front porch tvf -- 1 21 th gd start pulse delay tve -- 24 -- hs vsync pulse width tvw 1 3 16 th hsync/vsync phase shift tvpd 2 320 -- dclk auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 13/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 6. power on/off characteristics vcc power and led on/off sequence is as follows. in terface signals are also shown in the chart. signal s from any system shall be hi-z state or low level wh en vcc is off. power sequence timing value parameter min. typ. max. unit t1 0.5 - 10 [ms] t2 30 40 50 [ms] t3 200 - - [ms] t4 100 - - [ms] t5 0 16 50 [ms] t6 - - 10 [ms] t7 1000 - - [ms] t7 t 5 t2 t3 valid data t1 10% 90% 10% 90% t4 t 6 power supply vcc data signal backlight power auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 14/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. d. optical specification all optical specification is measured under typical condition (note 1, 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 -- -- 12 18 20 30 ms ms note 3 contrast ratio cr at optimized viewing angle 400 500 -- note 4 top bottom left viewing angle right cr 10 R 35 55 55 55 45 70 70 70 -- -- -- -- deg. note 5 brightness y l =0 300 375 -- cd/m 2 note 6 x =0 0.275 0.325 0.375 white y =0 0.290 0.340 0.390 x =0 tbd tbd tbd red y =0 tbd tbd tbd x =0 tbd tbd tbd green y =0 tbd tbd tbd x =0 tbd tbd tbd chromaticity blue y =0 tbd tbd tbd uniformity y l % 70 75 -- % note 7 note 1: ambient temperature =25 , and led lightbar voltage vl = 12 v. to be measur ed in the dark room. note 2: to be measured on the center area of panel with a viewing cone of 1 by topcon luminance meter bm-5a, after 15 minutes operation. center of the screen field=1 bm-5a auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 15/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note 3: definition of response time: the output signals of photo detector are measured when the input signals are changed from black to white(falling time) and from white t o black(rising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refer to figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% note 4.definition of contrast ratio: contrast ratio is calculated with the following fo rmula. status black" " at is lcd when output detector photo status white" " at is lcd when output detector photo (cr) ratio contrast = note 5. definition of viewing angle, , refer to figure as below. x' y x y' note 6. measured at the center area of the panel wh en all the input terminals of lcd panel are electrically opened. note 7: luminance uniformity of these 9 points is d efined as below: auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 16/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 17/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. e. reliability test items no. test items conditions remark 1 high temperature storage ta= 80 240hrs 2 low temperature storage ta= -30 240hrs 3 high ttemperature operation tp= 70 240hrs 4 low temperature operation ta= -20 240hrs 5 high temperature & high humidity tp= 50 . 80% rh 240hrs operation 6 heat shock -20 ~ 70 , 50 cycle, 2hrs/cycle non-operation 7 electrostatic discharge contact = 4 kv, class b air = 8 kv, class b note 5 8 image sticking 25 , tbd note 6 frequency range : 10hz~55hz stoke : 1.5mm sweep : 10hz~55hz~10hz 9 vibration 2 hours for each direction of x,y,z. total 6 hours. non-operation jis c7021, a-10 condition a 10 mechanical shock 100g . 6ms, x,y,z 3 times for each direction non-operation jis c7021, a-7 condition c 11 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 12 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces 13 pressure 5kg, 5sec note 7 note 1: ta: ambient temperature. tp: panel surface temperature note 2: in the standard conditions, there is not di splay function ng issue occurred. all the cosmetic specification is judged before the reliability stre ss. note 3: all the cosmetic specification is judged be fore the reliability stress. note 4: temperature and relative umidity range is s hown in the figure below auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 18/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note5 : all test techniques follow iec6100-4-2 stan dard. test condition note pattern procedure and set-up contact discharge 330?, 150pf, 1sec, 8 point, 10times/point air discharge 330?, 150pf, 1sec, 8 point, 10times/point criteria b C some performance degradation allowed. no data l ost. self-recoverable hardware failure. note 6: operate with chess board pattern as figure and lasting time and temperature as the conditions. then judge with 50% gray level, the mura is not wor se than auo defined limited sample. note 7: the panel is tested as figure. the jig is 10 mm made by cu with rubber and the loading speed is 3mm/min on position a~e. after the conditi on, no glass crack will be found and panel auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 19/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. function check is ok.( no guarantee lc mura lc bubble) loading lcm auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 20/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. f. packing and marking 1. packing form auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 21/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. module/panel label information the module/panel (collectively called as the produ ct) will be attached with a label of shipping numb er which represents the identification of the product at a specific location. refer to the product outli ne drawing for detailed location and size of the label. the label is composed of a 22-digit serial number with the f ollowing definition: example: 501m06zl06123456781z05: product manufacturing week code: wk50 product version: version 1 product manufactuing factory: m06 3. carton label information the packing carton will be attached with a carton l abel where packing qty, auo model name, auo part number, customer part number (optional) and a serie s of carton number in 13 or 14 digits are printed. the carton number is apparing in the following format: refer to the drawing of packing format for the loca tion and size of the carton label. auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 22/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. g. application note 1. system block example auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///
version: 0.3 page: 23/23 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. h. precautions 1. do not twist or bend the module and prevent the unsuitable external force for display module during assembly. 2. adopt measures for good heat radiation. be sure to use the module with in the specified temperature . 3. avoid dust or oil mist during assembly. 4. follow the correct power sequence while operatin g. do not apply the invalid signal, otherwise, it w ill cause improper shut down and damage the module. 5. less emi: it will be more safety and less noise. 6. please operate module in suitable temperature. t he response time & brightness will drift by differe nt temperature. 7. avoid to display the fixed pattern (exclude the white pattern) in a long period, otherwise, it will cause image sticking. 8. be sure to turn off the power when connecting or disconnecting the circuit. 9. polarizer scratches easily, please handle it car efully. 10. display surface never likes dirt or stains. 11. a dewdrop may lead to destruction. please wipe off any moisture before using module. 12. sudden temperature changes cause condensation, and it will cause polarizer damaged. 13. high temperature and humidity may degrade perfo rmance. please do not expose the module to the direct sunlight and so on. 14. acetic acid or chlorine compounds are not frien ds with tft display module. 15. static electricity will damage the module, plea se do not touch the module without any grounded device. 16. do not disassemble and reassemble the module by self. 17. be careful do not touch the rear side directly. 18. no strong vibration or shock. it will cause mod ule broken. 19. storage the modules in suitable environment wit h regular packing. 20. be careful of injury from a broken display modu le. 21. please avoid the pressure adding to the surface (front or rear side) of modules, because it will c ause the display non-uniformity or other function issue. 22. please use sscg(spread spectrum clock generator ) at system for emi reduction. auo confidential for junglim internal use only / 2008/11/13 free datasheet http:///

▲Up To Search▲

Price & Availability of A070VW05-V0

	To Download A070VW05-V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .